Juniper NETWORK AND SECURITY MANAGER 2010.4 - ADMININISTRATION GUIDE REV1, Administration Manual

Page: 582 / 1026

•
“Create a Polymorphic Object” on page 532
• “Add a Polymorphic Object to a Pre/Post Rule” on page 532
• “Map a Polymorphic Object to a Real Value” on page 533
Create a Polymorphic Object
This procedure assumes that a Central Manager administrator is logged onto a Central
Manager client.
To create a polymorphic object:
1.
In the main navigation tree, select Object Manager .
2.
Select one of the following objects that can be polymorphic objects:
•
Address
• Service
•
Zone
•
Global NAT
• Routing Instance
3.
Click the Add icon in the toolbar and select Polymorphic Address to open the Add
Polymorphic Address dialog box.
4.
Enter the following information for the new polymorphic address, then click OK :
•
Name
• Color (optional)
•
IP version- IPv4 or IPv6
•
Comment (optional)
NSM adds the polymorphic address object to the address tree.
Add a Polymorphic Object to a Pre/Post Rule
This procedure assumes that a Central Manager administrator is logged onto a Central
Manager client.
To create a polymorphic object:
1.
In the main navigation tree, select Policy Manager > Central Manager Policies .
2.
Select either Central Manager Pre Rules or Central Manager Post Rules .
3.
Click the Add icon in the toolbar and select Polymorphic Address .
Copyright © 2010, Juniper Networks, Inc. 532
Network and Security Manager Administration Guide