Juniper NETWORK AND SECURITY MANAGER 2010.4 - ADMININISTRATION GUIDE REV1, Administration Manual

Page: 172 / 1026

NOTE: Secure Access devices are more commonly configured as clusters.
See “Adding Clusters” on page 151 for details.
The following sections explain how to add a Secure Access or Infranet Controller device:
• Install and Configure the Secure Access or Infranet Controller Device on page 122
•
Add the Device in NSM on page 122
•
Configure and Activate the NSM Agent on the Secure Access or Infranet Controller
Device on page 124
• Confirm Connectivity and Import the Device Configuration into NSM on page 124
Install and Configure the Secure Access or Infranet Controller Device
Before you can add a Secure Access or Infranet Controller device to NSM, the device
must be installed and configured, and logon credentials for an NSM administrator must
be configured for it. Perform the following steps:
1.
Select System > Network > Overview on the device administrator's console and
ensure that basic connection information is configured on the device (network interface
settings, DNS settings, and password).
2.
Select Authentication > Auth. Servers and enter the username and password of the
NSM administrator in the applicable authentication server.
NOTE: Only password-based authentication servers can be used. One-time
password authentication is not supported.
3.
Select Administrators > Admin Roles and create an NSM agent role.
4.
Select Administrators > Admin Realms and create a new NSM agent administrator
realm for the NSM agent on the device. Use role mapping to associate the NSM agent
role and realm. Do not apply any role or realm restrictions for the NSM agent role or
realm.
NOTE: You cannot use NSM to add or manage a Secure Access device that
has Host Checker policies enabled for an admin user.
For complete details on installing and configuring Secure Access devices, see the Secure
Access Administration Guide .
For complete details on installing and configuring Infranet Controller devices, see the
Unified Access Control Administration Guide .
Add the Device in NSM
To add the device in the NSM UI, follow these steps:
Copyright © 2010, Juniper Networks, Inc. 122
Network and Security Manager Administration Guide