Juniper NETWORK AND SECURITY MANAGER 2010.4 - ADMININISTRATION GUIDE REV1, Administration Manual

Page: 745 / 1026

Table 73: VSD Counter Details
Description Item
The devices that are associated with the VSD or RTO. Device
The number of units associated with the VSD or RTO. Number of Units
The number of times a device changes operational states. State Change Counter
The transient state of a VSD or RTO group member while it was in
the process of joining the VSD or RTO group. Init Counter
The number of master devices. Master
The number of primary backup devices. Primary BackUp
The total number of backup devices. BackUp
An administrator purposefully assigned a device so that it cannot
participate in selecting a new master device. Ineligible
A VSD or RTO group device has an internal problem. InOperable
The number of conflicts that occurred on the master device. Master Conflict
The number of conflicts that occurred on the primary backup device. Primary Backup Conflict
The number of transmitted heartbeats on the devices. Tx Heartbeat
The number of received heartbeats on the devices. Rx Heartbeat
Viewing RTO Counter Details
Click the Counters tab to view specific information about your RTO counters. Table 74
on page 695 describes the information that is available from the RTO counters view:
Table 74: RTO Counters Details
Description Item
The devices that are associated with the RTO. Device
The member identification associated with this RTO. Member ID
The current status of the RTO: Active or Down. Status
The direction of the RTO: In or Out. Direction
The number of heartbeats not received from the RTOs peers. Lost Heartbeat
The number of times that the RTO was placed to Active. Counter to Active
695 Copyright © 2010, Juniper Networks, Inc.
Chapter 17: Realtime Monitoring