background image

 

Important Notices

 

The AN200 Editor is a comprehensive editing software program specially designed for

the AN200 Desktop Control Synthesizer — providing an easy, intuitive way to edit and

create your own original Patterns for the AN200.

 

IMPORTANT:

 

• Do not use any of the panel controls on the AN200 while editing the Patterns with the AN200

Editor, since this may inadvertently change the settings of the AN200.

 

Copyright Notices

 

• The software and this owner’s manual are the exclusive copyrights of Yamaha Corporation.
• Copying of the software or reproduction of this manual in whole or in part by any means is

expressly forbidden without the written consent of the manufacturer.

• Copying of the commercially available music sequence data and/or digital audio files is

strictly prohibited except for your personal use.

 

Trade Marks and Registered Trade Marks

 

• The company names and product names in this Owner’s Manual are the trademarks or regis-

tered trademarks of their respective companies.

 

Notices

 

• Yamaha makes no representations or warranties with regard to the use of the software and

documentation and cannot be held responsible for the results of the use of this manual and
the software.

• The windows and illustrations in this manual are for instructional purposes only, and may be

slightly different from the ones shown on your software.

 

Copyright © 2001 Yamaha Corporation. All rights reserved.
January, 2001
YAMAHA CORPORATION

 

AN200 Editor

 

Manual

Summary of Contents for Loopfactory AN200









































































Reviews: