46
Parameters /
Ctrl (Control) Matrix Parameter Tab
■
Ctrl (Control) Matrix Parameter Tab ............................
Many of the AN200's parameters can be controlled in real time. The Control Matrix pro-
vides an extraordinarily comprehensive and flexible way to control these parameters. Up
to 15 different controllers can be used simultaneously to control 15 separate parameters.
The particular physical controllers used depend on the connected MIDI instrument.
Among the more commonly used controllers are: Velocity, Modulation Wheel, After
Touch, and Foot Controller. Since any of the MIDI Control Change numbers can be used
for control sources, you can set up highly complex routings.
The Control Matrix settings determine which "source" (i.e., MIDI Control Change num-
bers, Modulation Wheel, Foot Controller, etc.) is used to control which AN200 "destina-
tion" parameter (i.e., VCF Cutoff, Resonance, FEG Depth, etc.).
This gives you the freedom to configure a completely different set of sources and desti-
nation parameters for each pattern. You can, for example, configure the AN1x to use
After Touch to apply vibrato, or the Modulation Wheel to change the resonance while you
play, determine the range for both Pitch Bend up and down, and much more.
The Control Matrix provides 15 sets of control setup parameters. The Depth of the con-
troller effect can also be set independently for each of the 15 sets.
