Juniper NETWORK AND SECURITY MANAGER 2010.4 - ADMININISTRATION GUIDE REV1, Administration Manual

Page: 138 / 1026

•
Export Device Config To File
• Import Device Config From File
The Import Device Admins role allows permission to run the Import Admin directive.
A new role (Export/Import Device Config to File) has been created to allow permission
to run the Export Device Config To File and Import Device Config From File directives.
Permissions Changes in Release 2005.3
In Release 2005.3, the Edit Devices, Device Groups, & Templates activity no longer allows
permission to run the directives listed in Table 17 on page 88. Use the activities listed in
the table instead.
Table 17: Changes to Edit Devices, Device Groups, & Templates Activity
Directives Activity
View Configlet View Configlet
Set Root Admin (4.x device only)
Set Admin Ports (4.x device only)
Set Admin SSH Enable Disable (4.x device only)
Edit Device Admin
Failover Failover Device
Modify BGP Peer Session
BGP Refresh Route
BGP Update Route on Peer
Device BGP Operations
Update AV Pattern Update AV Pattern
Get Entitlement from Entitlement Server Get Entitlement from Entitlement
Server
Check Config Sync Check Config Sync Status
Connect To Intranet Controller
Disconnect From Intranet Controller
Intranet Controller Operations
In Release 2005.3, the View Devices, Device Groups, & Templates activity no longer
allows permission to run the directive listed in Table 18 on page 88. Use the Device Site
Survey activity instead.
Table 18: Changes to View Devices, Device Groups, & Templates Role
Directives Activity
Site Survey Device Site Survey
Copyright © 2010, Juniper Networks, Inc. 88
Network and Security Manager Administration Guide