Juniper NETWORK AND SECURITY MANAGER 2010.4 - ADMININISTRATION GUIDE REV1, Administration Manual

Page: 742 / 1026

7.
Click OK to save the filter.
The new VPN filter is updated in the Filter Table.
8.
Click Apply to activate the selected filter. The filter results are shown in the VPN
Monitor view.
Modifying a VPN FIlter
To modify a VPN filter:
1.
Select Report Manager > VPN Monitor
2.
From the Option menu, select VPN Filter .
The VPN Filter dialog box is displayed.
3.
Select the edit icon.
The View VPN Filter dialog box is displayed.
4.
Change the existing field values and click OK .
The modified field values are updated in the Filter Table.
Deleting a VPN FIlter
To delete a VPN filter:
1.
Select Report Manager > VPN Monitor
2.
From the Option menu, select VPN Filter .
The VPN Filter dialog box is displayed.
3.
From the Filter Table, select the row for the filter that you want to delete.
4.
Select the delete icon.
The selected filter is deleted.
Configuring a VPN Display Filter
You can control the information that is provided in the VPN Monitor by configuring a VPN
display filter. From the
Options menu, select Display Filter to configure a VPN display
filter. You can view VPN information related to the type, status, or the specific security
device or virtual system associated with the VPN tunnel that you want to view. Click the
Refresh button to apply the Session Display criteria to the active session table view.
Viewing Active VPN Details
To view the details on the active VPN, click to select the VPN. From the View menu, select
Active VPN Details (alternatively, you can also right-click the VPN tunnel and select
Active VPN Details ).
Refer to “Viewing Active VPN Information” on page 673 for more information on the Active
VPN Details table.
Copyright © 2010, Juniper Networks, Inc. 692
Network and Security Manager Administration Guide