Juniper NETWORK AND SECURITY MANAGER 2010.4 - ADMININISTRATION GUIDE REV1, Administration Manual

Page: 872 / 1026

Exporting Reports to HTML
After you create your reports, you can export them into HTML. For example, if you want
to share information with other security experts about the attacks that you are noticing
in your network, use the following process to export the report onto disk:
1.
Select Export Reports from the File menu. Alternatively, you could right-click in the
chart window, and use the “Export reports in HTML” option.
2.
Select the Top Attacks report check box.
3.
Click Browse to save the file onto CD or to any other location on your desktop.
4.
Click Export . The report is exported onto your CD.
NSM saves the report in several file formats (such as .png, .html, and .gif) that you can
later display in any Web browser.
Setting Report Options
By default, each report in NSM provides information based on data available from the
current day in a horizontal bar chart. You can configure the duration, number of data
points, and appearance of each report by using the
Set Report Options selection in the
View menu.
NOTE: You can also access the Set Report Options dialog by right-clicking
the chart on each report.
Use the Set Report Options selection in the View menu to tailor your reports to display
only the specific information that you want. You can configure the following options in
each report:
• Report title
• Report type
•
Columns for the report
•
Time period
• Data point count
• Chart type
You can also access the Set Report Options dialog by right-clicking the chart on each
report.
Naming a Report
You can enter a name for a new report or rename an existing report in the General tab
of the Set Report Options window. You can also configure the name of the report
displayed in the report graph by editing its title.
Copyright © 2010, Juniper Networks, Inc. 822
Network and Security Manager Administration Guide