Juniper NETWORK AND SECURITY MANAGER 2010.4 - ADMININISTRATION GUIDE REV1, Administration Manual

Page: 470 / 1026

Adding a Destination NAT Object
To add a destination NAT object:
1.
Select
Object Manager
>
Junos NAT Objects
>
Destination NAT
. The
Destination NAT
dialog box appears. You can add, edit, delete, or search for a destination NAT object
using the icons at the top of this dialog box.
2.
Select ( + ) to create a new destination NAT object. The New JunosDestination NAT
dialog box appears:
•
Enter a name, color, and comment for the new destination NAT object.
•
Select (
+
) to configure the parameters for the new destination NAT object.
The
New – Junos Destination NAT
dialog box appears. Here, you must select the
device that performs the translation and define the address pool.
3.
Select a device from the
Device
drop-down list.
•
The devices are listed only if you have previously added these devices to NSM. To
add a device, use the
Device Manager
.
•
If a device is not selected, you cannot configure the
Proxy-ARP
and
Junosdestination-nat
fields.
4.
If the proxy ARP functionality is required, select the IP address of the interface, which
accepts the ARP requests, from the
Proxy ARP
drop-down list. If there are no values
listed, select (
+
) to configure a new value. The
New Interface
dialog box appears.
Specify the logical interface on which to configure proxy ARP and its details. For more
information, see “Configuring Proxy ARP” on page 421.
5.
Select ( + ) next to Junosdestination-nat to configure the address pool. The New Pool
dialog box appears.
You will see a list of values to select from the drop-down list if you have previously
configured address pools.
Table 42 on page 420 lists the fields that are available and the action you need to
perform on each fields.
Table 42: Destination NAT Configuration Options
Action Function Field Tab
Type a name for the pool. Descriptive name for the pool.
Name General
Select the routing instance name. The values are
listed only if you have added them previously.
To add a new routing instance to a device, select
Object Manager > Routing Instance Objects .
Specify the routing instance to which
the pool is bound. Ri Name Routing
Instance
Copyright © 2010, Juniper Networks, Inc. 420
Network and Security Manager Administration Guide