manualshive.com logo in svg

Juniper NETWORK AND SECURITY MANAGER 2010.4 - ADMININISTRATION GUIDE REV1, Administration Manual

The Juniper NETWORK AND SECURITY MANAGER 2010.4 - ADMINISTRATION GUIDE REV1 is an essential manual for those looking to effectively manage and secure their network. This comprehensive admininstration manual can be downloaded for free from manualshive.com, providing users with all the necessary information to successfully navigate the platform.

Share
Download
background image

Understanding Updating Errors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 262

Chapter 7

Managing Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 265

Managing Device Software Versions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 266

Upgrading the Device Software Version . . . . . . . . . . . . . . . . . . . . . . . . . . . . 266

Upgrading a Device Software Version from NSM . . . . . . . . . . . . . . . . . 268
Upgrading a Device Software Version outside NSM . . . . . . . . . . . . . . . 268

Adjusting the Device OS Version . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 269
Downgrading the Device OS Version . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 269
Rolling back the Device OS Version . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 269
Deleting the Device OS Version . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 270
Upgrading Device Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 270

Managing License Keys (ScreenOS Only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 270

Installing License Keys on a Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 271
Importing License Key Information into NSM . . . . . . . . . . . . . . . . . . . . . . . . . 271
Installing Trial License Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 271

Viewing and Reconciling Device Inventory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 272

Viewing the Device Inventory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 272
Comparing and Reconciling Device Inventory . . . . . . . . . . . . . . . . . . . . . . . . 273

Managing Large Binary Data Files (Secure Access and Infranet Controller Devices

Only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 275
Uploading and Linking Large Binary Data Files . . . . . . . . . . . . . . . . . . . . . . . 276
Importing Custom Sign-In Pages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 278

Creating a Custom Sign-In Page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 279
Linking to a Custom Sign-In Page Shared Object . . . . . . . . . . . . . . . . . . 279

Importing Antivirus Live Update Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . 280

Uploading Live Update Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 280

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 280

Linking to a Live Update File Shared Object . . . . . . . . . . . . . . . . . . . . . . 280

Importing Endpoint Security Assessment Plug-in (ESAP) Packages . . . . . 280

Uploading ESAP Packages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 280
Linking to an ESAP Package Shared Object . . . . . . . . . . . . . . . . . . . . . . 281

Importing Third-Party Host Checker Policies . . . . . . . . . . . . . . . . . . . . . . . . . 281

Uploading a Third-Party Host Checker Policy . . . . . . . . . . . . . . . . . . . . . 281
Linking to a Third-Party Host Checker Policy Shared Object . . . . . . . . . 282

Importing a Secure Virtual Workspace Wallpaper Image (Secure Access

Devices Only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 282
Uploading a Secure Virtual Workspace Wallpaper Image . . . . . . . . . . . 282
Linking to a Secure Virtual Workspace Wallpaper Image Shared

Object . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 282

Importing Hosted Java Applets (Secure Access Devices Only) . . . . . . . . . . 283

Uploading a Java Applet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 283
Linking to a Hosted Java Applet Shared Object . . . . . . . . . . . . . . . . . . . 283

Importing a Custom Citrix Client .cab File (Secure Access Devices Only) . . 284

Uploading a Custom Citrix Client .cab File . . . . . . . . . . . . . . . . . . . . . . . 284
Linking to a Custom Citrix .cab File Shared Object . . . . . . . . . . . . . . . . 284

Backing up and Restoring SA and IC Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . 284

Backing up an SA or IC Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 285
Restoring SA or IC Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 285

xv

Copyright © 2010, Juniper Networks, Inc.

Table of Contents

Summary of Contents for NETWORK AND SECURITY MANAGER 2010.4 - ADMININISTRATION GUIDE REV1



































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for NETWORK AND SECURITY MANAGER 2010.4 - ADMININISTRATION GUIDE REV1

Canon EOS 60D Quick Start Manual preview
EOS 60D
Brand: Canon Pages: 5
XenSource DL385 - ProLiant - G5 Manual preview
DL385 - ProLiant - G5
Brand: XenSource Pages: 313
Ulead COOL 3D-PLUG-IN MADNESS II Manual preview
COOL 3D-PLUG-IN MADNESS II
Brand: Ulead Pages: 10
Yamaha DM 1000 Manual preview
DM 1000
Brand: Yamaha Pages: 30
AT&T OneVision DEFINITY G3 Fault Management and integration User Manual preview
OneVision DEFINITY G3 Fault Management and integration
Brand: AT&T Pages: 153
Sony Ericsson Controller Mode Application Note preview
Controller Mode
Brand: Sony Ericsson Pages: 10
Xerox Phaser 340 Installer Installation preview
Phaser 340 Installer
Brand: Xerox Pages: 2
FARONICS DATA IGLOO Manual preview
DATA IGLOO
Brand: FARONICS Pages: 42
Aastra Venture IP Telephone System Installation Manual preview
Venture IP Telephone System
Brand: Aastra Pages: 12
VMware CLOUD DIRECTOR 1.0 Using preview
CLOUD DIRECTOR 1.0
Brand: VMware Pages: 3
VMware VmWare ESX Server 2.12 Deployment Deployment Manual preview
VmWare ESX Server 2.12 Deployment
Brand: VMware Pages: 34
VMware VCM 5.3 Manual preview
VCM 5.3
Brand: VMware Pages: 34
AirLive AIRTV-1000U User Manual preview
AIRTV-1000U
Brand: AirLive Pages: 19
3Com pcXset - NBX - PC Getting Started Manual preview
pcXset - NBX - PC
Brand: 3Com Pages: 26
Autodesk 225A1-05A111-1001 - AutoCAD Electrical 2009 Getting Started preview
225A1-05A111-1001 - AutoCAD Electrical 2009
Brand: Autodesk Pages: 255
Red Hat ENTERPRISE LINUX AS 2.1 - Installation Manual preview
ENTERPRISE LINUX AS 2.1 -
Brand: Red Hat Pages: 210
Red Hat ENTERPRISE LINUX 5.3 - RELEASE MANIFEST Release Note preview
ENTERPRISE LINUX 5.3 - RELEASE MANIFEST
Brand: Red Hat Pages: 240
KAPERSKY ANTI-VIRUS - FOR FREEBSD-OPENBSD-BSDI FILE... User Manual preview
ANTI-VIRUS - FOR FREEBSD-OPENBSD-BSDI FILE...
Brand: KAPERSKY Pages: 214

Brands by name

Popular brands

Load more brands