Juniper NETWORK AND SECURITY MANAGER 2010.4 - ADMININISTRATION GUIDE REV1, Administration Manual

Page: 89 / 1026

of services appears in the
Services
box. If you select multiple services, NSM uses
the combined criteria for the search.
•
If you select
Install On
, you can click the
Select Target
button to view a list of target
devices. Check desired devices and click
OK
to select multiple target devices. Your
selection of devices appears in the
Install On
box.
4.
Click the Search button to execute the search. The Search Results appear at the bottom
of the dialog box. The applicable search category is listed to the left and the matching
search objects are listed to the right.
5.
Use the buttons above the list of search results to add or search for more results, edit
a result, and delete a result.
6.
Click Close to exit the search.
39 Copyright © 2010, Juniper Networks, Inc.
Chapter 1: Introduction to Network and Security Manager