Juniper NETWORK AND SECURITY MANAGER 2010.4 - ADMININISTRATION GUIDE REV1, Administration Manual

Page: 88 / 1026

Figure 10: Exact String Search Mode Example
Global Search
To perform a global search:
1.
Select
Global Search
from the
Search
menu. The
New Search
dialog box appears. It
allows you to specify search criteria across different views and to switch between
different views.
2.
Select a category from the drop-down list in the Search Category field. You can select
All, Address, Service, Attacks, IDP Attack Group, DI Profile, Attack Group, or Policy .
3.
Select a filter to be applied to the chosen category from the drop-down list in the
Filter
field. You can select
Name, IP, Comment, Service,
or
Install On.
Depending on the filter you selected, NSM prompts you for related information.
• If you select Name , you must enter the name of the object in the Name field. You
can then specify whether you want the search to be a Case Sensitive or Regular
Expression type of search.
•
If you select
IP
as a filter, NSM asks you for the
IP Version
, the
IP
address and the
Netmask.
If you enter both the IP address and the netmask, NSM uses the combined
criteria for the search.
• If you select Comment , enter the comment you are searching for in the Comment
field. You can then specify whether you want the search to be a Case Sensitive or
Regular Expression type of search.
•
If you select
Service
, you can click the
Select Service
button to view a list of services.
Check the desired services and click
OK
to select multiple services. Your selection
Copyright © 2010, Juniper Networks, Inc. 38
Network and Security Manager Administration Guide