manualshive.com logo in svg

Juniper NETWORK AND SECURITY MANAGER 2010.4 - ADMININISTRATION GUIDE REV1, Administration Manual

The Juniper NETWORK AND SECURITY MANAGER 2010.4 - ADMINISTRATION GUIDE REV1 is an essential manual for those looking to effectively manage and secure their network. This comprehensive admininstration manual can be downloaded for free from manualshive.com, providing users with all the necessary information to successfully navigate the platform.

Share
Download
background image

Creating VPNs with VPN Manager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 568

Adding the VPN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 569
Configuring Members . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 570

Adding Policy-Based Members . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 570
Adding RAS Users . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 572
Adding Routing-Based Members . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 572

Configuring Topology . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 574

Configuring Common VPN Topologies . . . . . . . . . . . . . . . . . . . . . . . . . . 574
Defining Termination Points . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 576

Configuring Gateways . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 576

Configuring Gateway Properties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 576
Configuring Gateway Security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 578
Configuring IKE IDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 579

Configuring IKE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 580

IKE Properties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 580
Configuring Security Level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 582

Autogenerating VPN Rules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 582
Configuring Overrides . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 583

Editing Policy Rules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 583
Editing Device Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 584
Viewing the Device Tunnel Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . 584

Adding the VPN Link . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 585
Editing VPNs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 585

Editing VPN Protected Resources . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 585
Editing Users . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 585
Editing the VPN Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 586
Editing VPN Overrides . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 586

VPN Manager Examples . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 586

Example: Configuring an Autokey IKE, Policy-Based Site-to-Site VPN . . . . 586
Example: Configuring an Autokey IKE RAS, Policy-Based VPN . . . . . . . . . . . 591
Example: Configuring an Autokey IKE, Route-Based Site-to-Site VPN . . . . 594
Example: Configuring XAuth Authentication with External User Group . . . . 597

Creating Device-Level VPNs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 601

Supported Configurations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 602
Creating AutoKey IKE VPNs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 602

IKEv2 and EAP Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 602
Configuring Gateways . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 603
Configuring Routes (Route-based only) . . . . . . . . . . . . . . . . . . . . . . . . . 607
Configuring the VPN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 607
Adding a VPN Rule . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 610

Creating Manual Key VPNs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 610

Adding XAuth Users . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 611
Configuring Routes (Route-based only) . . . . . . . . . . . . . . . . . . . . . . . . . 611
Configuring the VPN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 611
Adding a VPN Rule . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 613

Creating L2TP VPNs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 614

Adding L2TP Users . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 614
Configuring L2TP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 614
Adding a VPN Rule . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 615

xxvii

Copyright © 2010, Juniper Networks, Inc.

Table of Contents

Summary of Contents for NETWORK AND SECURITY MANAGER 2010.4 - ADMININISTRATION GUIDE REV1



































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for NETWORK AND SECURITY MANAGER 2010.4 - ADMININISTRATION GUIDE REV1

Canon 70 MC - ZR70MC MiniDV Digital Camcorder Instruction Manual preview
70 MC - ZR70MC MiniDV Digital Camcorder
Brand: Canon Pages: 57
AMD RAIDXpert User Manual preview
RAIDXpert
Brand: AMD Pages: 120
SanDisk musicmatch User Manual preview
musicmatch
Brand: SanDisk Pages: 11
NUANCE OmniPage Direct Manual preview
OmniPage Direct
Brand: NUANCE Pages: 44
Garmin Pilot for Android User Manual preview
Pilot for Android
Brand: Garmin Pages: 150
Red Hat CERTIFICATE SYSTEM 6.0 - MIGRATION GUIDE Manual preview
CERTIFICATE SYSTEM 6.0 - MIGRATION GUIDE
Brand: Red Hat Pages: 76
DeLorme XMap 6 User Manual preview
XMap 6
Brand: DeLorme Pages: 437
Adaptec CDP-00276-01-A User Manual preview
CDP-00276-01-A
Brand: Adaptec Pages: 45
3Com 3C16120 - SuperStack 3 Server Load Balancer User Manual preview
3C16120 - SuperStack 3 Server Load Balancer
Brand: 3Com Pages: 99
TomTom TomTom App Reference Manual preview
TomTom App
Brand: TomTom Pages: 58
GRASS VALLEY AURORA INGEST 7 Datasheet preview
AURORA INGEST 7
Brand: GRASS VALLEY Pages: 4
GRASS VALLEY Aurora Browse Upgrade Instructions preview
Aurora Browse
Brand: GRASS VALLEY Pages: 42
TROY Group IRD 2300 Quick Start Manual preview
IRD 2300
Brand: TROY Group Pages: 10
MACROMEDIA CONTRIBUTE 3 - DEPLOYING AND PUBLISHING SERVER Manual preview
CONTRIBUTE 3 - DEPLOYING AND PUBLISHING SERVER
Brand: MACROMEDIA Pages: 38
Daikin DCS002A71 Operation Manual preview
DCS002A71
Brand: Daikin Pages: 16
Oki LP441s Manual preview
LP441s
Brand: Oki Pages: 34
Belkin n52te - Nostromo SpeedPad Game Pad User Manual preview
n52te - Nostromo SpeedPad Game Pad
Brand: Belkin Pages: 21
Canon EOS 450D Instruction Manual preview
EOS 450D
Brand: Canon Pages: 101

Brands by name

Popular brands

Load more brands