Juniper NETWORK AND SECURITY MANAGER 2010.4 - ADMININISTRATION GUIDE REV1, Administration Manual

Page: 287 / 1026

4.
If the config group re0 exists, open it by double-clicking its icon. If it does not already
exist, click the Add icon, name the new configuration group re0, and then save it.
5.
In the navigation tree for re0, select System .
6.
In the Host Name field, assign a name to the Routing Engine, for example, Dual-RE-re0 .
7.
Click OK twice.
Figure 64: Configuring Routing Engine Specific Parameters
Viewing a Routing Engine Configuration
The following example shows how to display the hostname assigned to a specific Routing
Engine. See Figure 65 on page 238 and follow these steps:
1.
In the navigation tree, select Device Manager > Devices .
2.
In the Device Tree, double-click the Junos router with redundant Routing Engines.
3.
In the Info tab of the device editor, select Routing Engine Configuration .
237 Copyright © 2010, Juniper Networks, Inc.
Chapter 5: Configuring Devices