Johnson Controls YVAHP072B31S, Service Manual

Page: 1272 / 1796

Detailed Setting Simple Setting
Indoor Unit
Outdoor Unit
NOTE:
*1: This item can be set only if the outdoor unit supports this function. Go to [Settings] > [Outdoor unit],
then select on check box to enable the function. Contact your dealer or distributor for details.
*2: The Capacity (Present value) and Lower noise level (Present value) display the value set for this
system. The actual value may differ if those values were set or changed by another system or
outdoor units.
*3 This setting will be applied to outdoor unit. Another group/block connected to the same outdoor unit
may be affected by changing this setting.
*4 The new setting will take effect within 15 minutes after the setting was changed.
Select lowering noise operation
level from [00] - [09]. (*1 *2 *3 *4) Set the capacity at [0%] or from
[40%] to [100%] or [Cancel] (5%
cut). (*1 *2 *3 *4)
Toggle the control window
to display [Detail setting] or
[Simple setting]. Toggle the display
between [Indoor unit]
or [Outdoor unit]. Toggle the control window
to display [Detail (advanced)
setting] or [Simple setting].
Control without restrictions from screen
(on/off).
Option for [Whole ON]
non-availability (on/off).
Option for [Whole OFF]
non-availability (on/off).
Option for [Whole ON] and [Whole OFF]
availability (on/off).
Option to restrict overall control from screen: activate all non-available
control options (on/off).
2-352
Service Manual
OPERATION