Johnson Controls YVAHP072B31S, Service Manual

Page: 604 / 1796

1-588
Service Manual
INSTALLATION
Ƒ (4) Wait until the error pop-up message disappears, then enter H-LINK name and the desired IP address.
(for example, 192.168.0.5)
Change the subnet mask and default gateway when needed.
(a) Input H-LINK name
(b) Input desired IP address
(c) Input desired subnet mask
(d) Input desired default gateway
(e) Select desired icon.
NOTICE:
Ɣ Contact the network administrator for setting the IP address, subnet mask and default gateway.
No default gateway is required to connect LAN to this system.
Regarding issues of network security, contact the network administrator.
NOTE:
Ɣ H-LINK name is a required item.
Ɣ The following characters may not be used
in the H-LINK name: “ , ”, “ ; ” and “&”.
(a) Click [Register].
Ƒ (5) Click on [Register].
To ensure normal operation, click on the [Register] button even if no part of the H-LINK name, IP Address,
Subnet mask, or default gateway is in any way changed.
NOTICE:
Ɣ If registration isn’t completed, follow item
No.10 of [Service] > 3 Troubleshooting >
[Initiating], then perform a clock correction
of the Adapter.