Johnson Controls YVAHP072B31S, Service Manual

Page: 601 / 1796

Service Manual
1-585
INSTALLATION
1
Daylight Savings Time is required to be set.
Initial Setting
1 Daylight Saving Time Setting
This chapter describes the procedure for setting Daylight Saving Time.
This display is shown only
¿ rst start up.
Ƒ (1) Start up the management software.
[Daylight saving time setting] is displayed.
NOTE:
Ɣ To proceed, perform the Test Run operation for all air conditioners and installation of the adapter must be
completed, and management computer, adapter, and all air conditioners must be turned ON.
NOTICE:
Ɣ When selecting [Cancel], management software will shut down.
Ƒ (2) Input the required setting for daylight saving time.
(a) Select [Yes] or [No] for daylight saving time.
(b) Select Start date.
(c) Select End date.
(d) Select Shut time.
(e) When completing to set 1 to 4, click [Register].
NOTE:
Ɣ When registering daylight saving time by management software, this system speci ¿ c time zone will be
set to the OS. Do not change the time zone setting of the OS directly, otherwise this system cannot
work normally. When changing the daylight saving time setting, register it by this management software.
(a)
(b)
(c)
(d)
(e)