Johnson Controls YVAHP072B31S, Service Manual

Page: 1253 / 1796

Service Manual
2-333
OPERATION
Prepare the memory card for the controller to automatically store the setting and operation data.
Ŷ&RPSDWLEOHPHPRU\FDUG
The Secure Digital (SD) and Secure Digital High Capacity (SDHC) memory cards
based on the SD Standard are acceptable However, some cards may not work
properly.
Ɣ 7KHVHPHPRU\FDUGVDUHFRQVLGHUHGDFFHSWDEOHE\-RKQVRQ&RQWUROV
Ɠ
SanDisk Ultra
®
SD™/SDHC™ Card
Ɠ
SanDisk
®
SD™/SDHC™ Card (standard type)
10. Notes for Using Memory Card
Ŷ Folder and File
Memory Card
CS-EZ…… This folder is required for using the controller.
If this folder does not exist or is not found, a new folder will be
created automatically.
Operation Time Data File……File name when operation write is done.
RunningTime_20120401080040.csv (Accumulated Operation Time)
ThermoOnTime_20120401080040.csv (Thermo-ON Time)
1. Unlock the write protection lock of the memory card. 1. Push the memory card (a) down until you hear the “click” .
The card is released and can be removed.
2. Close the lid (b).
Write Protection Lock Switch
When this switch is locked,
data cannot be written onto
the memory card.
Slide the switch in the
direction of the arrow.
Lid
Lid
2.Open cover/lid (a). Then insert memory card(b).
(a)
(b)
(b)
(a)
Ŷ,QVHUWWKHPHPRU\FDUG Ŷ5HPRYHWKHPHPRU\FDUG