Johnson Controls YVAHP072B31S, Service Manual

Page: 1271 / 1796

Upon completing all the settings,
click [Apply]. All settings will
become active.
The [Apply] button affects only
either indoor units or outdoor units
that are displayed in the “current
window”.
Set running status from [ON] and
[OFF]. (*1)
This button is used to reset ¿ lter sign. Items designated “off limits” to the remote controller
Set running mode from
[COOL], [HEAT], [DRY], [FAN],
[AUTO]. (*1)
Set set the temperature. (*1)
Set fan speed from [1] to [4] or
[Auto]. (*1)
Set louver from [1] to [7] or [Auto].
(*1)
This panel will display in blue when
setting is changed.
Information of Selected Panel
NOTE:
*1: Each setting may or may not affect all the units in the group/block or
a single unit, depending on selected units. For details, refer to the
installation and maintenance manual and the operation manual for
selected units.
Upon controlling air conditioners and facility units, select the desired items from control window after selecting a
control group/block or unit.
(1) Control window
This panel shows present status of
the selected group/block or unit.
To undo the setting, click on this
button. [Undo] button affects
only either indoor units or outdoor
units displayed in the current
window.
2 Controlling
* When using a non RC equipped
device, this item cannot be set.
Set to disable the 1 day schedule
for the indoor unit.
NOTICE:
Ɣ When using wireless remote controllers, there are restrictions for
setting [RC prohibited] as follows:
- When setting [RC prohibited] for ON/OFF, the fan speed cannot be
set as [4].
- When setting [RC prohibited] for running mode, the fan speed
cannot be set as [4].
Ɣ When using wireless remote controllers, do not set the fan speed as
[AUTO] for the indoor unit.
Service Manual
2-351
OPERATION