Johnson Controls YVAHP072B31S, Service Manual

Page: 609 / 1796

Service Manual
1-593
INSTALLATION
Ƒ (4) Select what to monitor and control by way of an external input and output.
Ƒ (5) Select the signal from the external input 1-3 (si001-si003) for monitoring.
Ƒ (6) Select the signal from the external output 1-3 (so001-so003) for controlling.
(a) Choose H-LINK.
(b) Select facility unit number.
(c) Select what to monitor or control.
(d) Select signal.
(e) Set unit name.
(f) Select icon.
(g) Click [Set].
(h) Click [Setting completed] when all items are set.
(a)
(b)
(d)
(e) (f)
(g)
(h)
(c)
NOTE:
Ɣ When using facility units, do not use refrigerant system numbers 62-63, for they are reserved as ”blank”.
Ɣ Do not register more than 200 units (total of Indoor units and Facility units) per a single adapter.
Ɣ Up to six facility units can be registered.
Ɣ The facility units will be displayed after existing units starting from 006 to 001.
NOTE:
Ɣ Items (4) - (6) need to be set if only monitoring and controlling other facility units such as lighting
by way of external inputs. When registering the facility unit, input data sequentially beginning at
the far left. Verify that the units are registered in sequence. Skipping by one number can cause
defects. Also, when deleting a unit, delete data in reverse sequence, moving left from far right.
NOTICE:
Ɣ Each cell color denotes as
follows.
Yellow: Selected
Blue: Set
Green: Set completed
Ƒ (7) Refer to items (4) to (6) for all H-LINK(s).
NOTICE:
Ɣ Each cell color denotes as
follows.
Yellow: Selected
Blue: Set
Green: Set completed
Orange: Canceled