Johnson Controls YVAHP072B31S, Service Manual

Page: 612 / 1796

1-596
Service Manual
INSTALLATION
6 Group Register
A “Group” is de ¿ ned as a set of units that can be monitored or controlled (or both) by this system. One or more
RC groups within a single H-LINK can be registered as Group. Up to 128 Groups can be incorporated within a
single H-LINK, and up to 160 RC groups can be incorporated within a single Group.
To monitor or control indoor units, these units must be registered within the Group.
Ƒ (1) Go to [Settings] > [Group register] and allocate an RC group number of indoor units in
H
from top to
bottom to register the group name and icons.
(a) Choose H-LINK.
(b) Choose units. (Indoor unit or Facility unit)
(c) Choose RC group number.
(d) Enter group name.
(e) Select icon.
(f) Click [Set].
(g) Click [Setting completed] when all items are set.
(h) Verify all settings (a to g) for the local H-LINK environment.
(b)
(c) (e) (d) (f) (g) (a)
6
Group Register is required to be set.
NOTICE:
Ɣ The maximum allowable number of characters in a group name is 64.
Ɣ The following characters cannot be used in unit name: “ , ”, “ ; ” and “&”.
NOTE:
Ɣ Erase the schedule of the Group before making any changes. Then, make those changes for the Group
in the screen.
NOTICE:
Ɣ Each cell color denotes as
follows.
Yellow: Selected
Blue: Set
Green: Set completed
Orange: Canceled