Johnson Controls YVAHP072B31S, Service Manual

Page: 1170 / 1796

2-250
Service Manual
OPERATION
7.8 Louver Swing Direction
1. Select the target Group on the
“Monitor (All Groups)” screen or
³0RQLWRU%ORFN´VFUHHQWRFKDQJH
the louver swing direction.
The pop-up “Setting” for the
selected Group is displayed on the
touchscreen.
2. %\WRXFKLQJ³ U ” or “ V ” of the
“LOUVER”, the louver swing
direction will be changed alternately
as follows.
AUTO
Auto swing operation will be
started.
3. Touch “Monitor screen” to return
the Monitor screen.
NOTES:
Ɣ %\WRXFKLQJ³ޒ ” or “ ޓ ” at the detailed setting screen, the Louver Swing Direction will be switched to another
group in the same block.
Ɣ Control Restricted (Run/Stop Only): In case of “Enable”, each Setting Change applies for all Groups or
%ORFNV6HWWLQJ&KDQJHLVQRWSRVVLEOHIRUHDFK*URXS
Ɣ Depending on the model of the air conditioner, the setting may not be possible or may be calibrated
automatically.
Ɣ Louver position on the LCD and the actual louver position do not always match during the auto swing
operation.
Ɣ The actual Louver Swing Direction may not stop immediately after the switch is pressed.
Ɣ If the settings are mixed when multiple groups are selected, the display will remain blank.
AUTO
LCD
Indication
COOL
DRY
HEAT
FAN Angle Range
Angle Range
Auto
Swing
Auto
Swing
0RQLWRU$OO*URXSV! 0RQLWRU%ORFN!
1 1
2 3