1-288
Service Manual
INSTALLATION
3.1 Combination of Outdoor Unit and Indoor Unit
The combination capacity of indoor unit against the outdoor unit is selected depending on the outdoor unit
capacity. Refer to “Installation and Maintenance Manual” for outdoor unit to decide the required combination
RILQGRRUDQGRXWGRRUXQLWVDQGWKHFRPELQDWLRQXQLWFDSDFLW\
3. Before
Installation
3.2 Transportation and Handling
(1)
Transport the product as close to the installation location as possible before unpacking.
(2) Do not lay any objects on the indoor unit.
(3) Take care when handling the indoor unit. Rough handling of the indoor unit can damage the unit.
(4) The indoor unit handle is fabricated from foam polystyrene and is susceptible to breakage if any
excessive force is applied as a result of mishandling of the unit during installation.
7RDYRLGGDPDJHWRWKHUHVLQFRYHUVFRYHULWZLWKFORWKEHIRUHOLIWLQJRUPRYLQJWKHLQGRRUXQLW
'RQRWPRYHWKHORXYHUE\KDQG,IPRYHGWKHORXYHUPHFKDQLVPZLOOEHFRPHGDPDJHG
NOTES:
Comply with the following when using the wireless controller (CIR01).
Ɣ
7KHEXLOWLQUHFHLYHUFDQEHXVHGRQO\IRUDVLQJOHRSHUDWLRQDQGLQGLYLGXDORSHUDWLRQVIRUWZLQWULSOHDQG
TXDGFRPELRZHYHULWFDQQRWEHXVHGIRUWKHIROORZLQJRSHUDWLRQV
* Operation with 2 Controllers (CIR01 and wired controller CIW01)
This is because the switch “SW2” on the DIP switch PCB must be “WIRED” when using CIW01.
* Simultaneous Operation of Multiple Units
Ɣ
:KHQXVLQJWKHZLUHOHVVFRQWUROOHU&,5IRUVLPXOWDQHRXVRSHUDWLRQIRUWZLQWULSOHDQGTXDG
FRPELQDWLRQWKHRSWLRQDOUHFHLYHUNLW&:',5.LVUHTXLUHG
3.3 Factory-Supplied
Accessories
(1) Check to ensure that the following accessories are packed with the indoor unit.
inch (mm)
Accessory
Qty.
Purpose
Usage
006 to 012 Type 015 to 024 Type
Mounting
Plate
1
1
For Mounting Indoor Unit
Refer to the section 5.
Screw
(
I
4 x 25L)
6
8
For Fixing Mounting Plate
Screw
(
I
4 x 40L)
2
4
Fixing Plate
ʊ
1
For Fixing Piping
Refer to the section
5.2.7.
Pipe
Insulation
1
1
For Refrigerant Piping
Connection
Refer to the section
6.2.
PVC Tube
2
2
For Separating
Communication Cables and
Wired Controller Cables
from Power Supply Wirings
7/16 ID (11 ID)
Refer to the section
8.5.
Cable Clamp
5
5
Logo Label
1
1
Logo Label for HITACHI
Brand
Refer to the instruction
paper attached
together with the logo
labels.
Logo Label
1
1
Logo Label for YORK
Brand
Summary of Contents for YVAHP072B31S
