Johnson Controls YVAHP072B31S, Service Manual

Page: 1290 / 1796

2 Display / Sound Setting
Con ¿ guration of the display for the management computer.
Display Maximum number of panel display
Display Size 1024×768 1280×1024 1600×1200
Large 5×4=20 6×6=36 8×7=56
Small 10×13=130 13×20=260 17×24=408
Layout 10-30 (approx.) 20-40 (approx.) 30-60 (approx.)
* If setting [Order by Group A-H] in the group array pattern, the number of available displays
may be small.
(1) Go to [Settings] > [Display].
(2) Set the display size for this software.
The window cannot display correctly if the size set is bigger than the size of the Management Computer screen.
Some items may be shown in smaller size when clicking on the maximize button (At the right upper end of the
windows bar). Proportion each of the windows in this section.
The resolution where bar scroll will not be necessary to show scroll contents are as follows.
NOTE:
Ɣ To display the ambient air temperature, perform function selection C8 on the wired controller.
Ɣ Some units cannot display the ambient air temperature or the suction air temperature.
Ɣ When using the power save function of the wired controller, the displayed ambient air temperature may
differ with the actual air temperature.
NOTICE:
Ɣ The display size above is a standard window size. They are shown in full-window when the maximize
button on the upper right is selected.
(3) In the updating interval, set the update cycle for current status.
(4) Set the temperature display switch of the monitor.
2-370
Service Manual
OPERATION