Johnson Controls YVAHP072B31S, Service Manual

Page: 1171 / 1796

Service Manual
2-251
OPERATION
7.9 Temperature Setpoint
1. Select the target Group on the
“Monitor (All Groups)” screen
RU³0RQLWRU%ORFN´VFUHHQWR
change the temperature setpoint.
The pop-up “Setting” for the
selected Group is displayed on
the touchscreen.
2. Touch “ U ”, and the temperature
is increased by 1
o
F (0.5°C).
(Max. 86°F (30
o
C)
Touch “ V ”, the temperature is
decreased by 1
o
F (0.5°C).
Ɣ At Cooling, Dry, Fan, and Auto
operation: Min. 66°F (19
o
C),
Ɣ At Heating operation: Min.
62°F (17
o
C).
3. Touch “Monitor screen” to return
to Monitor screen.
NOTES:
Ɣ %\WRXFKLQJ³ޒ ” or “ ޓ ” at the detailed setting screen, the Temperature Setpoint will be switched to another
group in the same block.
Ɣ Control Restricted (Run/Stop Only): If the condition “Enable” is selected, each settings change will apply to
DOO*URXSVRU%ORFNV$VHWWLQJVFKDQJHLVQRWSRVVLEOHIRUHDFK*URXS
Ɣ 7KH¿JXUHDERYHVKRZVDQH[DPSOHRIWKHWHPSHUDWXUHVHWSRLQWIRUDFRQQHFWHG$LU&RQGLWLRQHU8QLW
The temperature setpoint range may not be an option in certain cases.
Ɣ If the settings are mixed when multiple groups are selected, the display will remain blank.
Ɣ The temperature reading; 76°F (Fahrenheit) may be displayed in Celsious as 24°C or 24.5°C.
Ɣ The temperature reading; 78°F (Fahrenheit) may be displayed in Celsious as 25.5°C or 26°C.
0RQLWRU$OO*URXSV! 0RQLWRU%ORFN!
1 1
2 3