IBM RS/6000 SP, Maintenance Information

Page: 378 / 388

MAP 0570: End of Call
006 (continued)
– Record time as complete on Machine Type/Serial Number. Refer to Table 1-14 for proper serial number
to record the service action against.
– Record hardware addresses for any Ethernet card(s) or I/O planar card(s) replaced for updating custom-
er's bootptab.info and/or other file(s).
– Check conditions in table of Step 002 on page 1-5.
Are any of the conditions in table of Step 002 on page 1-5 present?
Yes No
007
Service call is complete.
– Unfence any node(s) that were fenced for service action. See "Viewing Switch Partitions" in
IBM
RS/6000 SP: Maintenance Information, Volume 3, Locations and Service Procedures for more
information.
– Check "Preventive Maintenance" in
IBM RS/6000 SP: Maintenance Information, Volume 3,
Locations and Service Procedures for preventive maintenance procedures.
008
Further service action is required.
– Go to Step 002 on page 1-5.
009
–
Table 1-14. Proper Serial Number to Record
Fault Isolated To Serial Number to Record
RS/6000 SP
Ÿ
Base Frame:
– Power distribution
– Frame supervisor
– Supervisor harness
– Frame cabling
Ÿ
Switch Feature:
– Multi-Switch Frame (F/C
2030/1)
– Switch assembly
– Switch adaptors
– Switch cables
Ÿ Processor node components
Controlling frame serial number (see note)
Other:
Ÿ
Control workstation
Ÿ
File server (not included in
RS/6000 SP frame network)
Do NOT record time against RS/6000 SP when trouble is isolated to
another Machine Type.
Note: Controlling frame serial number is the RS/6000 SP Model 20X, 30X, or 40X frame of a multiple frame
configuration.
1-358
RS/6000 SP MAPs