IBM RS/6000 SP, Maintenance Information

Page: 124 / 388

MAP 0210: Wide Processor Node Environment
027 (continued)
Does the processor node IPL?
Yes No
028
Processor has problem with IPL.
– Go to “MAP 0130: Processor Node” on page 1-30.
029
Problem resolved.
– Remove processor node from service position.
– Go to “MAP 0570: End of Call” on page 1-357.
030
Memory protection error: “memoryProtect”
This fault is normally generated only when invalid memory cards are installed in the processor node.
Have memory parts been changed recently (since last successful IPL) in this processor node?
Yes No
031
Problem may be: base memory card, CPU card, I/O planar, or node supervisor control cable.
– Replace parts, one at a time, until problem is corrected.
Are you able to correct the problem?
Yes No
032
Call next level of support.
033
Problem resolved.
– Go to “MAP 0570: End of Call” on page 1-357.
034
Check memory card and SIMM part numbers in Diagnostic Information for Micro Channel Bus Systems,
(SA38-0532) and Adapters, Devices and Cable Information, (SA38-0533) to ensure that they are compat-
ible with the fastest Type 7013 machines.
– If necessary, call next level of support.
1-104
RS/6000 SP MAPs