IBM RS/6000 SP, Maintenance Information

Page: 341 / 388

MAP 0530: Switch Assembly Power
Label 0 in diagram: Single clock source must be selected for the entire switch network. Refer to
"Selecting Appropriate Switch Clocks" in
IBM RS/6000 SP: Maintenance
Information, Volume 3, Locations and Service Procedures, for additional
information.
Label 1 in diagram:
Primary node communicates with switch assembly in primary frame.
Label 2 in diagram: Connections to secondary nodes in primary frame are checked.
Label 3 in diagram: Any wrap plugs/terminators in primary frame are checked.
Label 4 in diagram: Switch assembly in primary frame communicates with switch assemblies in
secondary frame(s) (if present).
Label 5 in diagram:
Connections to secondary nodes in secondary frame are checked.
Chapter 1. Maintenance Analysis Procedures (MAPs)
1-321