IBM RS/6000 SP, Maintenance Information

Page: 313 / 388

MAP 0500: Ethernet LAN
ifconfig en1 up
– From control workstation, issue ping command to this processor node.
ping
nodename
– Check for response(s) indicating communication.
Does ping command indicate communication with this processor node?
Yes No
017
– Put circuit breaker at front of processor node in the Off (‘0’) position, then remove processor node
from frame.
– Remove processor node cover.
– Return to appropriate table in Step 012 on page 1-291 or Step 014 on page 1-292 to continue
service.
018
Communication has been established with the Ethernet connection for this processor node.
Are there other processor nodes with an Ethernet connection problem?
Yes No
019
Problem resolved.
– Go to “MAP 0570: End of Call” on page 1-357.
020
– Go to Step 001 on page 1-288.
Chapter 1. Maintenance Analysis Procedures (MAPs)
1-293