IBM RS/6000 SP, Maintenance Information

Page: 319 / 388

MAP 0510: Switch Assembly
Priority Message or condition Action
1 Environmental problems
Ÿ Errpt: “Failure...”
Ÿ Log: “Shutdown: Voltage...”
Ÿ
Log: “Shutdown: Fan...”
Ÿ
Log: “Shutdown: Temperature...”
Ÿ
Errpt: “Warning...”
Ÿ
Log: “Warning:...”
Ÿ
Environment (Yellow) LED- on or flashing
Go to “MAP 0520: Switch Assembly
Environment” on page 1-301.
2 Power problem
Ÿ (Power) Green LED- off or flashing
Ÿ
Switch has no power
Ÿ
All voltages at zero
Go to “MAP 0530: Switch Assembly
Power” on page 1-313.
3 Switch function problem
Ÿ Error(s) in /var/adm/SPlogs/css/out.top
(see note)
Ÿ Problem(s) with switch_responds
Ÿ
Problem(s) returned from errpt -a -N Worm
Ÿ
Problem(s) detected by CE/customer.
Go to “MAP 0540: Switch Function” on
page 1-322.
Notes:
1. out.top is located in the primary node. To find the primary node, issue:
Eprimary
2. Verify that the file has a valid (recent) timestamp using:
ls -l
Male Wrap Plug
Female Wrap Plug
P/N 48G5620 P/N 48G5619
Figure 1-31. HiPS Wrap Plugs
Chapter 1. Maintenance Analysis Procedures (MAPs)
1-299