HP StorageWorks SN6000 Command Line Interface Manual Download Page 115

Page: 115 / 330

HP StorageWorks SN6000 Fibre Channel Switch Command Line Interface Guide 115

Deleting a data capture configuration

To delete a data capture configuration from the Tech_Support_Center profile, enter the

capture remove

command, as shown in the following example:

SN6000 FC Switch #> admin start

SN6000 FC Switch (admin) #> callhome edit

SN6000 FC Switch (admin-callhome) #> capture remove

Capture Entries for Profile: Tech_Support_Center

Index TimeOfDay DayOfWeek Interval

----- --------- --------- --------

1 02:00 Sat 1 (weeks)

Please select a capture entry from the list above ('q' to quit): 1

The selected capture entry has been removed from profile Tech_Support_Center.

This configuration must be saved with the 'callhome save' command

before it can take effect, or to discard this configuration

use the 'callhome cancel' command.

Testing a Call Home profile

To test a Call Home profile, enter the

callhome test profile

command, as shown in the following

example. This command generates a test message and routes it to the email recipients specified in the

profile.

SN6000 FC Switch #> admin start

SN6000 FC Switch (admin) #> callhome test profile group4

A callhome profile test has been started.

A notification with the test result will appear

on the screen when the test has completed.

SN6000 FC Switch (admin) #>

Test for Callhome Profile group4 Passed.

Changing Simple Mail Transfer Protocol servers

The Call Home service configuration enables you to specify a primary and a secondary SMTP server to

which the switch connects. The active server is the server that receives messages from the switch. By default,

the primary SMTP server is the active server. Should the active server lose connection, control passes

automatically to the other server. You can explicitly change the active server by entering the

callhome changeover

command, as shown in the following example:

SN6000 FC Switch #> admin start

SN6000 FC Switch #> callhome edit

SN6000 FC Switch #> (admin-callhome) #> callhome changeover

The currently active CallHome SMTP server will change. Please confirm (y/n): [n] y

Though the active server status changes, the primary SMTP server remains the primary, and the secondary

SMTP server remains the secondary.

Clearing the Call Home message queue

To clear email messages from the Call Home message queue, enter the

callhome queue clear

command, as shown in the following example:

SN6000 FC Switch #> admin start

SN6000 FC Switch (admin) #> callhome queue clear

The callhome queue will be cleared. Please confirm (y/n): [n] y

To display the contents of the Call Home message queue, see ”

Displaying Call Home database

information

” (page 110).

Summary of Contents for StorageWorks SN6000











































































































































































































































































































































Search results

Summary of Contents for StorageWorks SN6000

Reviews:

Related manuals for StorageWorks SN6000

Brands by name

Popular brands

HP StorageWorks SN6000, Command Line Interface Manual

Search results

Summary of Contents for StorageWorks SN6000

Reviews:

Related manuals for StorageWorks SN6000

Brands by name

Popular brands