HP StorageWorks SN6000, Command Line Interface Manual

Page: 216 / 330

216 Command Reference
set setup services
Description Configures services on the switch.
Authority Admin session
Syntax
set setup services
This command prompts you in a line-by-line fashion to enable or disable switch services. Table 49
describes the switch service parameters. For each parameter, enter a new value or press Enter to
accept the current value shown in brackets.
IMPORTANT: Be mindful when disabling
TelnetEnabled
and
GUIMgmtEnabled
; it is possible
to disable all Ethernet access to the switch.
Table 49 Switch services settings
Parameter Description
TelnetEnabled
Enables (
True
) or disables (
False
) the ability to manage the switch
over a Telnet connection. Disabling this service is not recommended.
The default is
True
.
SSHEnabled
Enables (
True
) or disables (
False
) Secure Shell (SSH) connections to
the switch. SSH secures the remote connection to the switch. To
establish a secure remote connection, your workstation must use an
SSH client. The default is
False
.
GUIMgmtEnabled
Enables (
True
) or disables (
False
) out-of-band management of the
switch with Simple SAN Connection Manager, Enterprise Fabric
Management Suite, SNMP, and SMI-S. If this service is disabled, the
switch can only be managed inband or through the serial port. The
default is
True
.
SSLEnabled
Enables (
True
) or disables (
False
) secure SSL connections for
management applications including Simple SAN Connection
Manager, QuickTools, Enterprise Fabric Management Suite, and
SMI-S. The default is
False.
• Simple SAN Connection Manager version 1.0 does not support the
SSL service. If SSL is enabled, you will be unable to manage the
switch using this version of Simple SAN Connection Manager.
• This service must be enabled to authenticate users through a
RADIUS server.
• Enabling SSL automatically creates a security certificate on the
switch.
• To enable secure SSL connections, you must first synchronize the
date and time on the switch and workstation.
• To disable SSL when using a user authentication RADIUS server,
the RADIUS server authentication order must be local.
EmbeddedGUIEnabled
Enables (
True
) or disables (
False
) the QuickTools embedded switch
management application. QuickTools enables you to point at a switch
with an internet browser and manage the switch. This parameter is the
master control for the
set setup system
command parameter,
EmbeddedGUIEnabled
. The default is
True
.