HP StorageWorks SN6000 Command Line Interface Manual Download Page 148

Page: 148 / 330

148 Command Reference

group

Description

Creates groups, manages membership within the group, and manages the membership of groups in

security sets.

Authority

Admin session and a Security Edit session. For information about starting a Security Edit session, see

the

security

command. The

list

members

securitysets

, and

type

operands are

available without an Admin session.

Syntax

group

add [group]

copy [group_source] [group_destination]

create [group]

[type]

delete [group]

edit [group] [member]

list

members [group]

remove [group] [member_list]

rename [group_old] [group_new]

securitysets [group]

type [group]

Operands

add [group]

Initiates an editing session in which to specify a group member and its attributes for the existing

group given by [group]. ISL, Port, and MS member attributes are described in

Table 8

Table 9

and

Table 10

respectively. The group name and group type attributes are read-only fields

common to all three tables.

Table 8

ISL group member attributes

Attribute

Description

Member

Worldwide name of the switch that would attach to the switch. A member

cannot belong to more than one group.

Authentication

Enables (

Chap

) or disables (

None

) authentication using the Challenge

Handshake Authentication Protocol (CHAP). The default is

None

PrimaryHash

The preferred hash function to use to decipher the encrypted primary secret

sent by the ISL member. The hash functions are MD5 or SHA-1. If the ISL

member does not support the primary hash, the switch will use the

secondary hash.

PrimarySecret

Hexadecimal string that is encrypted by the primary hash for

authentication with the ISL group member. The string has the following

lengths depending on the primary hash function:

•

MD5 hash: 16-byte

•

SHA-1 hash: 20-byte

SecondaryHash

Hash function to use to decipher the encrypted secondary secret sent by

the ISL group member. Hash values are

MD5

SHA-1

. The secondary

hash is used when the primary hash is not available on the ISL group

member. The primary hash and the secondary hash cannot be the same.

Summary of Contents for StorageWorks SN6000











































































































































































































































































































































Search results

Summary of Contents for StorageWorks SN6000

Reviews:

Related manuals for StorageWorks SN6000

Brands by name

Popular brands

HP StorageWorks SN6000, Command Line Interface Manual

Search results

Summary of Contents for StorageWorks SN6000

Reviews:

Related manuals for StorageWorks SN6000

Brands by name

Popular brands