HP StorageWorks SN6000 Command Line Interface Manual Download Page 109

Page: 109 / 330

HP StorageWorks SN6000 Fibre Channel Switch Command Line Interface Guide 109

To display the Call Home service configuration, enter the

show setup callhome

command, as shown

in the following example.

SN6000 FC Switch (admin) #> show setup callhome

Callhome Information

--------------------

PrimarySMTPServerAddr 0.0.0.0

PrimarySMTPServerPort 25

PrimarySMTPServerEnabled False

SecondarySMTPServerAddr 0.0.0.0

SecondarySMTPServerPort 25

SecondarySMTPServerEnabled False

ContactEmailAddress [email protected]

PhoneNumber <undefined>

StreetAddress <undefined>

FromEmailAddress [email protected]

ReplyToEmailAddress [email protected]

ThrottleDupsEnabled True

+ indicates active SMTP server

Managing the Call Home database

To modify the Call Home database:

Open an Admin session with the

admin start

command. An Admin session prevents other accounts

from making changes at the same time through Telnet, QuickTools, Simple SAN Connection Manager,

Enterprise Fabric Management Suite, or any other management application.

SN6000 FC Switch #> admin start

Open a Callhome Edit session with the

callhome edit

command. The Callhome Edit session

provides access to the

profile

callhome

, and

capture

commands that are used to make

modifications to the Call Home database.

SN6000 FC Switch (admin) #> callhome edit

SN6000 FC Switch (admin-callhome)#> callhome . . .

SN6000 FC Switch (admin-callhome)#> profile . . .

SN6000 FC Switch (admin-callhome)#> capture . . .

When you finish making changes, take one of the following actions:
• To save the changes and close the Callhome Edit session, enter the

callhome save

command.

Changes take effect immediately.

SN6000 FC Switch (admin-callhome)#> callhome save

• To close the Callhome Edit session without saving changes, enter the

callhome cancel

command.

SN6000 FC Switch (admin-callhome)#> callhome cancel

To release the Admin session for other administrators, enter the

admin end

command.

To remove all Call Home profiles and restore the Call Home service configuration to its factory state, enter

the

reset callhome

command.

SN6000 FC Switch (admin) #> reset callhome

Summary of Contents for StorageWorks SN6000











































































































































































































































































































































Search results

Summary of Contents for StorageWorks SN6000

Reviews:

Related manuals for StorageWorks SN6000

Brands by name

Popular brands

HP StorageWorks SN6000, Command Line Interface Manual

Search results

Summary of Contents for StorageWorks SN6000

Reviews:

Related manuals for StorageWorks SN6000

Brands by name

Popular brands