HP StorageWorks SN6000 Command Line Interface Manual Download Page 160

Page: 160 / 330

160 Command Reference

ipsec

Description

Manages the IP Security database. The IP Security database consists of the Security Association

database and the Security Policy database. The

ipsec edit

command opens a session in which to

create and manage associations and policies.

Authority

Admin session except for the

history

operand. The

clear

operand also requires an Ipsec Edit

session.

Syntax

ipsec

cancel

clear

edit

history

limits

save

Operands

cancel

Closes the current Ipsec Edit session. Any unsaved changes are lost.

clear

Deletes all associations and policies from the from the volatile edit copy of the IP security

configuration. This operand requires an Ipsec Edit session. The operand does not affect the

non-volatile IP security configuration; however, if you enter the

ipsec clear

command

followed by the

ipsec save

command, the non-volatile IP security configuration will be deleted

from the switch.

NOTE:

The preferred method for deleting the IP security configuration from the switch is the

reset ipsec

command.

edit

Opens an Ipsec Edit session in which to create and manage associations and policies. Ipsec Edit

session commands include

ipsec clear

ipsec association

commands, and

ipsec policy

commands. This operand requires an Admin session.

history

Displays a history of IP security modifications. This operand does not require an Admin session.

History information includes the following:
• Time of the most recent IP security database modification and the user who performed it
• Checksums for the active and inactive IP security databases

limits

Displays the maximum and current numbers of configured associations and policies. This

operand does not require an Admin session or an Ipsec Edit session. However, in an Ipsec Edit

session, this command displays the number of both configured associations and policies, plus

those created in the edit session but not yet saved.

save

Saves changes made during the current Ipsec Edit session.

Examples

The following is an example of the

ipsec history

command:

SN6000 FC Switch #> ipsec history

IPsec Database History

----------------------

ConfigurationLastEditedBy johndoe@OB-session5

ConfigurationLastEditedOn Sat Mar 8 07:14:36 2008

Active Database Checksum 00000144

Inactive Database Checksum 00000385

Summary of Contents for StorageWorks SN6000











































































































































































































































































































































Search results

Summary of Contents for StorageWorks SN6000

Reviews:

Related manuals for StorageWorks SN6000

Brands by name

Popular brands

HP StorageWorks SN6000, Command Line Interface Manual

Search results

Summary of Contents for StorageWorks SN6000

Reviews:

Related manuals for StorageWorks SN6000

Brands by name

Popular brands