HP StorageWorks SN6000 Command Line Interface Manual Download Page 319

Page: 319 / 330

HP StorageWorks SN6000 Fibre Channel Switch Command Line Interface Guide 319

14 Support and Other Resources

Document conventions and symbols

WARNING!

Indicates that failure to follow directions could result in bodily harm or death.

CAUTION:

Indicates that failure to follow directions could result in damage to equipment or data.

IMPORTANT:

Provides clarifying information or specific instructions.

NOTE:

Provides additional information.

TIP:

Provides helpful hints and shortcuts.

Contacting HP

HP contact information

For HP technical support:

•

In the United States, see the Contact HP United States webpage:

(

http://welcome.hp.com/country/us/en/contact_us.html

). To contact HP by phone, call:

1-800-HP-INVENT (1-800-474-6836). This service is available 24 hours a day, 7 days a week. For

continuous quality improvement, calls may be recorded or monitored.

Table 75

Document conventions

Convention

Element

Medium blue text:

Figure 1

Cross-reference links and email addresses

Medium blue, underlined text

(

http://www.hp.com

)

Website addresses

Bold font

•

Keys that are pressed

•

Text typed into a GUI element, such as into a box

•

GUI elements that are clicked or selected, such as menu and list

items, buttons, and check boxes

Italics font

Text emphasis

Monospace font

•

File and directory names

•

System output

•

Code

•

Commands, their arguments, and argument values

Monospace, italic font

•

Code variables

•

Command-line variables

Monospace, bold font

Emphasis of monospace text, including file and directory names,

system output, code, and text typed at the command line

Summary of Contents for StorageWorks SN6000











































































































































































































































































































































Search results

Summary of Contents for StorageWorks SN6000

Reviews:

Related manuals for StorageWorks SN6000

Brands by name

Popular brands

HP StorageWorks SN6000, Command Line Interface Manual

Search results

Summary of Contents for StorageWorks SN6000

Reviews:

Related manuals for StorageWorks SN6000

Brands by name

Popular brands