HP StorageWorks SN6000 Command Line Interface Manual Download Page 163

Page: 163 / 330

HP StorageWorks SN6000 Fibre Channel Switch Command Line Interface Guide 163

Encryption

Algorithm that encrypts outbound data or decrypt inbound data.

The encryption algorithm can be one of the following:

•

DES-CBC

•

3DES-CBC

•

Null

•

Blowfish-CBC

•

AES-CBC

•

Twofish-CBC

EncryptionKey

Key string to use in encrypting or decrypting data such as

"123456789012345678901234"

Table 13

Association configuration parameters (continued)

Parameter

Description

Operands

delete [association]

Deletes the specified association given by [association] from the Security Association database.

You must enter the

ipsec save

command afterwards to save your changes.

edit [association]

Opens an edit session in which to change the configuration of an existing association given by

[association]. For descriptions of the association parameters, refer to

Table 13

. If the connection

is not secure (SSH is disabled), the

AuthenticationKey

and

EncryptionKey

values are

masked.

list

[option]

Displays the configuration for the policies given by [option]. If you omit [option], the command

displays the configuration of all active associations. [option] can be one of the following:

[association]

Displays the configuration for the association given by [association].

active

Displays the configuration for all active associations.

configured

Displays the configuration for all user-defined associations.

edited

Displays the configuration for all associations that have been modified, but not saved.

rename [association_old] [association_new]

Renames the association given by [association_old] to the association given by

[association_new]. You must enter the

ipsec save

command afterwards to save your

changes. Dynamic associations cannot be renamed.

Summary of Contents for StorageWorks SN6000











































































































































































































































































































































Search results

Summary of Contents for StorageWorks SN6000

Reviews:

Related manuals for StorageWorks SN6000

Brands by name

Popular brands

HP StorageWorks SN6000, Command Line Interface Manual

Search results

Summary of Contents for StorageWorks SN6000

Reviews:

Related manuals for StorageWorks SN6000

Brands by name

Popular brands