manualshive.com logo in svg

HP StorageWorks SN6000, Command Line Interface Manual

The HP StorageWorks SN6000 offers efficient and reliable storage capabilities for your business needs. Enhance your productivity with this high-performance storage solution. For easy installation and guidance, be sure to download the free User Manual from manualshive.com, providing step-by-step instructions and essential information to optimize your experience.

Share
Download
background image

114 Call Home Configuration

Adding a data capture configuration

To add a data capture configuration to the Tech_Support_Center profile, enter the 

capture add

 

command, as shown in the following example. If the Tech_Support_Center profile does not exist, you must 

create it using the 

profile create

 command.

SN6000 FC Switch #> admin start

SN6000 FC Switch (admin) #> callhome edit

SN6000 FC Switch (admin-callhome) #> capture add

  A list of attributes with formatting and default values will follow.

  Enter a value or simply press the ENTER key to accept the default value.

  If you wish to terminate this process before reaching the end of the list

  press 'q' or 'Q' and the ENTER key to do so.

  Value (press ENTER to accept the default, 'q' to quit):

    TimeOfDay  (HH:MM)                        [02:00]

    DayOfWeek  (Sun,Mon,Tue,Wed,Thu,Fri,Sat)  [Sat  ]

    Interval   (decimal value, 1-26 weeks)    [1    ]

  A capture entry has been added to profile Tech_Support_Center.

  This configuration must be saved with the 'callhome save' command

  before it can take effect, or to discard this configuration

  use the 'callhome cancel' command.

Modifying a data capture configuration

to modify a data capture configuration in the Tech_Support_Center profile, enter the 

capture edit

 

command, as shown in the following example:

SN6000 FC Switch #> admin start

SN6000 FC Switch (admin) #> callhome edit

SN6000 FC Switch (admin-callhome) #> capture edit

Capture Entries for Profile:  Tech_Support_Center

  Index  TimeOfDay  DayOfWeek  Interval

  -----  ---------  ---------  --------

  1      02:00      Sat        1 (weeks)

Please select a capture entry from the list above ('q' to quit): 1

  A list of attributes with formatting and current values will follow.

  Enter a value or simply press the ENTER key to accept the current value.

  If you wish to terminate this process before reaching the end of the list

  press 'q' or 'Q' and the ENTER key to do so.

  Value (press ENTER to accept the default, 'q' to quit):

    TimeOfDay  (HH:MM)                        [02:00]

    DayOfWeek  (Sun,Mon,Tue,Wed,Thu,Fri,Sat)  [Sat  ]

    Interval   (decimal value, 1-26 weeks)    [1    ]

  The selected capture entry has been edited for profile Tech_Support_Center.

  This configuration must be saved with the 'callhome save' command

  before it can take effect, or to discard this configuration

  use the 'callhome cancel' command.

Summary of Contents for StorageWorks SN6000











































































































































































































































































































































Reviews:

No comments

Related manuals for StorageWorks SN6000

Pro2 HDMI4SP Operating Instructions preview
HDMI4SP
Brand: Pro2 Pages: 2
Lightolier KUBIK LIGHT 5 FACE Instructions For Installation preview
KUBIK LIGHT 5 FACE
Brand: Lightolier Pages: 1
Samsara VG54 Install Manual preview
VG54
Brand: Samsara Pages: 13
Factor HD-1x2-4K User Manual preview
HD-1x2-4K
Brand: Factor Pages: 10
XTBA SMART MERGE4:2 Manual preview
SMART MERGE4:2
Brand: XTBA Pages: 4
GYS 027695 Translation Of The Original Instructions preview
027695
Brand: GYS Pages: 12
Philips SWV2143W Specifications preview
SWV2143W
Brand: Philips Pages: 2
PRO SIGNAL PSG3040 Manual preview
PSG3040
Brand: PRO SIGNAL Pages: 4
PRO SIGNAL PSG3039 Instructions preview
PSG3039
Brand: PRO SIGNAL Pages: 4
LINK-MI LM-DA104 User Manual preview
LM-DA104
Brand: LINK-MI Pages: 5
LINK-MI LM-SP20 Operating Instructions Manual preview
LM-SP20
Brand: LINK-MI Pages: 7
Converters.TV 15215 Operation Manual preview
15215
Brand: Converters.TV Pages: 5
Converters.TV 15130 Operation Manual preview
15130
Brand: Converters.TV Pages: 5
CommScope FOSC-OC-3 Installation Instruction preview
FOSC-OC-3
Brand: CommScope Pages: 2
NEUTRIK NPPA-TT-SD25 Instruction Manual preview
NPPA-TT-SD25
Brand: NEUTRIK Pages: 13
MSA Workman FP Stryder 10144431 User Instructions preview
Workman FP Stryder 10144431
Brand: MSA Pages: 48
CHIEF SL-236 Specifications preview
SL-236
Brand: CHIEF Pages: 1
Smart Technologies SMART GoWire Textless Install Instructions preview
SMART GoWire
Brand: Smart Technologies Pages: 2

Brands by name

Popular brands

Load more brands