HP StorageWorks SN6000 Command Line Interface Manual Download Page 133

Page: 133 / 330

HP StorageWorks SN6000 Fibre Channel Switch Command Line Interface Guide 133

Examples

The following is an example of the

capture add

command:

SN6000 FC Switch #> admin start

SN6000 FC Switch (admin) #> callhome edit

SN6000 FC Switch (admin-callhome) #> capture add

A list of attributes with formatting and default values will follow.

Enter a value or simply press the ENTER key to accept the default value.

If you wish to terminate this process before reaching the end of the list

press 'q' or 'Q' and the ENTER key to do so.

Value (press ENTER to accept the default, 'q' to quit):

TimeOfDay (HH:MM) [02:00]

DayOfWeek (Sun,Mon,Tue,Wed,Thu,Fri,Sat) [Sat ]

Interval (decimal value, 1-26 weeks) [1 ]

A capture entry has been added to profile Tech_Support_Center.

This configuration must be saved with the 'callhome save' command

before it can take effect, or to discard this configuration

use the 'callhome cancel' command.

The following is an example of the

capture edit

command:

SN6000 FC Switch #> admin start

SN6000 FC Switch (admin) #> callhome edit

SN6000 FC Switch (admin-callhome) #> capture edit

Capture Entries for Profile: Tech_Support_Center

Index TimeOfDay DayOfWeek Interval

----- --------- --------- --------

1 02:00 Sat 1 (weeks)

Please select a capture entry from the list above ('q' to quit): 1

A list of attributes with formatting and current values will follow.

Enter a value or simply press the ENTER key to accept the current value.

If you wish to terminate this process before reaching the end of the list

press 'q' or 'Q' and the ENTER key to do so.

Value (press ENTER to accept the default, 'q' to quit):

TimeOfDay (HH:MM) [02:00]

DayOfWeek (Sun,Mon,Tue,Wed,Thu,Fri,Sat) [Sat ]

Interval (decimal value, 1-26 weeks) [1 ]

The selected capture entry has been edited for profile Tech_Support_Center.

This configuration must be saved with the 'callhome save' command

before it can take effect, or to discard this configuration

use the 'callhome cancel' command.

Summary of Contents for StorageWorks SN6000











































































































































































































































































































































Search results

Summary of Contents for StorageWorks SN6000

Reviews:

Related manuals for StorageWorks SN6000

Brands by name

Popular brands

HP StorageWorks SN6000, Command Line Interface Manual

Search results

Summary of Contents for StorageWorks SN6000

Reviews:

Related manuals for StorageWorks SN6000

Brands by name

Popular brands