HP NetServer AA 4000, Manual

Page: 83 / 386

73
Chapter 4 MtcCEX Messages
MtcCEX: 32-bit platform-specific initialization failed. Status = 0xy
Variables y – An error status displayed in hexadecimal
Severity Error
Description This message displays in a Windows NT blue screen on a monitor attached directly to a CE
when the HP NetServer AA CE Transport experiences an unexpected failure while attempting
to perform platform-specific initialization. This error is fatal to CE operations and is followed
by a reset of the CE.
Hardware/Software This message indicates either a software configuration error or an unexpected failure
initializing the CE’s hardware environment.
Action • The CE is reset and attempts to reboot Windows NT. If this failure recurs repeatedly, the
CE will be marked faulted.
• Rerun the HP NetServer AA installation on both IOPs and verify that the specified CE
hardware platform matches the CEs in the HP NetServer AA configuration.
• If the failure persists, contact your service provider for assistance.
MtcCEX: Could not initialize MIC adapter. Status = 0xy
Variables y – An error status displayed in hexadecimal
Severity Error
Description This message displays in a Windows NT blue screen on a monitor attached directly to a CE
during CE operating system boot if the HP NetServer AA CE Transport cannot initialize the
MIC adapter.
Related Messages
MtcCEX: Unable to initialize the MIC adapter. Status = 0x y
Hardware/Software This message most likely indicates a hardware failure in the CE MIC.
Action • Verify that the CE MIC is properly installed and passes its self-test.
• Replace the MIC adapter if necessary.
• If the problem persists, contact your service provider for assistance.