HP NetServer AA 4000, Manual

Page: 187 / 386

177
Chapter 12 MtcMICX Messages
IOPn.MtcMICX: MtcMICX resources have not been returned following a port transition. The system will be rebooted
to recover.
Severity Error
Description Required resources were not returned by client software. These resources must be returned
before the IOP is allowed to join the configuration. The system will reboot itself to correct the
problem.
Action No action is required. The HP NetServer AAsoftware automatically reboots the system to
correct the problem. If this problem persists, contact your service provider for assistance.
IOPn.MtcMICX: Port state change failed to change the state to the required setting.
Severity Error
Description MtcMICX attempted to change the state of the MIC port, but the new port state did not match
the requested port state. This probably indicates a hardware error; however, an internal
software error can also cause this problem. The additional data specifies the MIC port number
where the problem occurred.
Action The HP NetServer AA software automatically reboots the IOP.
IOPn.MtcMICX: Port state change not allowed. MtcMICX has detected a flow control discrepancy.
Severity Error
Description MtcMICX has detected a flow control discrepancy, meaning that resources belonging to
MtcMICX have not been returned by one or more HP NetServer AA providers. This is an
internal software error.
Action The IOP should reboot automatically. If it does not do so, or if this error recurs, contact your
service provider for assistance.