HP NetServer AA 4000 Manual Download

Page: 235 / 386

225

Chapter 13

MtcMon Messages

IOPn.MtcMon status: An Endurance Manager request to shut down the operating system on the CE(s) could not be

performed because shutdown is already in progress.

Severity

Warning

Description

This message is generated when a command is issued to shut down the CE’s Windows NT

operating system and a previous request is still in progress. The initial request continues

processing, and any subsequent requests are ignored.

This message is generated when a CE shutdown is in progress (because of either an internal

Endurance Manager request or an Endurance Manager command) and a subsequent CE

shutdown is requested.

Related Messages

IOP

.MtcMon status: An Endurance Manager command has been issued to shut

down

Tuplex

IOP

.MtcMon status: An Endurance Manager command has been issued to

disable

Tuplex

IOP

.MtcMon status: Server shutdown has been requested by the operator.

IOP

.MtcMon status: CE operating system shutdown has been requested by

the operator.

Hardware/Software

This message is generated by software in response to a user request to shut down the

Windows NT operating system on the CE(s).

Action

No action is required. The Endurance Manager request associated with this message is not

executed.

Summary of Contents for NetServer AA 4000



































































































































































































































































































































































































Search results

Summary of Contents for NetServer AA 4000

Reviews:

Related manuals for NetServer AA 4000

Brands by name

Popular brands

HP NetServer AA 4000, Manual

Search results

Summary of Contents for NetServer AA 4000

Reviews:

Related manuals for NetServer AA 4000

Brands by name

Popular brands