HP NetServer AA 4000, Manual

Page: 275 / 386

265
Chapter 13 MtcMon Messages
IOPn.MtcMon status: IOPx was removed because it failed to activate the CE Interconnect(s).
Variables x – the ID of the IOP that was removed
Severity Error
Description At least one of the Interconnects to the specified IOP could not be activated during CE boot or
CE synchronization. To complete booting or synchronization, the specified IOP was removed
from service.
When this error occurs, it is applied to a threshold. When the threshold is exceeded, the
Interconnect is faulted.
Related Messages
IOP n .MtcMon status: IOP x has been removed from service.
IOP n .MtcMon status: The boot process has started for CE x .
IOP n .MtcMon status: The synchronization process has started for CE x .
IOP n .MtcMon status: An error occurred activating Interconnect ESI x .
IOP n .MtcMon status: IOPx was removed at the direction of IOP y .
Hardware/Software This message is typically generated as a result of a hardware error on the Interconnect.
Action • On the IOP reported in this message, use the Event Viewer to locate an
IOP n .MtcMon
status: An error occurred activating Interconnect ESI x .Event
message. The ESI specified in this message is causing the condition. When this error
occurs, it is applied to a threshold. When the threshold is exceeded, the Interconnect is
faulted.
• Manually repair the Interconnect, clear the faulted state, and allow the IOP to rejoin the
configuration.