HP NetServer AA 4000, Manual

Page: 351 / 386

341
Chapter 14 MtcScsiP and MtcScsiR Messages
IOPn.MtcScsiP status: The administrator is attempting to enable DISKn.
Variables n – the disk number; for example, DISK0, DISK1, DISK2
Severity Informational
Description The administrator is attempting to enable the specified disk using the HP NetServer AA
Manager.
Action No action is required.
IOPn.MtcScsiP status: The DISKn copy target has too few sectors to support a copy from its mirror set peer. The copy
target must be replaced with a larger disk.
Variables n – the disk number; for example, DISK0, DISK1, DISK2
Severity Error
Description The disk must act as a mirror copy target for its mirror set peer. However, the mirror copy
target disk is not big enough to contain all of the data from the mirror copy source disk.
Action Replace the smaller disk with a larger disk capable of acting as a mirror copy target disk for
the existing mirror disk.
IOPn.MtcScsiP status: The IOPs have different numbers of SCSI adapters. Each SCSI adapter in an IOP must have a
peer in the other IOP. The IOPs will not be allowed to join until this problem is resolved.
Severity Error
Description Each SCSI adapter in an IOP must have a peer in the other IOP. The IOPs will not be allowed
to join until this problem is resolved.
Action Add or remove a SCSI adapter so that the number of HP NetServer AA configured SCSI
adapters on each IOP is the same.
IOPn.MtcScsiP status: The Registry contains an invalid Mirror Copy Bias value. Use the HP NetServer AA Manager
to enter a correct value.
Severity Error
Description The Windows NT Registry contains an invalid Mirror Copy Bias value. HP NetServer AA
SCSI software will use a default value instead.
Action • Use the HP NetServer AA Manager to determine the current Mirror Copy Bias value.
• If desired, reset it to another value.