HP NetServer AA 4000, Manual

Page: 274 / 386

Chapter 13 MtcMon Messages
264
IOPn.MtcMon status: IOPx was removed at the direction of IOPy.
Variables x – the ID of the IOP being removed
y – the ID of the IOP that directed the removal
Severity Warning
Description The specified IOP was removed at the direction of the remote IOP. This message is generated
when a transition is occurring in the system and an error was detected on the IOP that was
removed. The IOP was removed so the transition could be completed successfully.
Related Messages
IOP n .MtcMon status: IOP x has been removed from service.
IOP n .MtcMon status: The boot process has started for CE x .
IOP n .MtcMon status: The synchronization process has started for CE x .
IOP n .MtcMon status: An error occurred activating Interconnect ESI x .
IOP n .MtcMon status: IOP x was removed because it failed to activate the
CE Interconnect(s).
Hardware/Software This message is typically generated as a result of a hardware error on the specified IOP or an
Interconnect between the specified IOP and a CE.
Action • Examine the event log on the IOP shown in this message. Look for the message
IOP n .MtcMon status: An error occurred activating Interconnect ESI x
or
another message that indicates the nature of the failure that caused this message.
• Manually repair the problem and allow the IOP to rejoin the configuration.