HP NetServer AA 4000, Manual

Page: 273 / 386

263
Chapter 13 MtcMon Messages
IOPn.MtcMon status: IOPx is unavailable for initialization because it is currently FAULTED.
Variables x – the ID of the IOP that is unavailable for initialization
Severity Warning
Description This message is generated during IOP initialization when the Endurance software is loaded.
The specified IOP is in a faulted state and is not available for configuration into the Endurance
server. If the other IOP is not disabled or faulted, the CE is booted when it is powered up.
Related Messages
IOP n .MtcMon status: IOP x is faulted and requires repair.
Hardware/Software This message is generated during boot when the IOP was previously marked as faulted. This
may have occurred due to a software or a hardware error.
Action Examine the event logs to determine the reason that the IOP was previously faulted. Enable the
IOP by issuing an IOP Enable Operation command.
IOPn.MtcMon status: IOPx joining has been aborted because the thresholding database was modified. IOP
initialization and joining will be retried.
Variables x – the ID of the IOP whose joining has been aborted
Severity Warning
Description This message is generated during IOP joining if a system error occurs that causes a change to
the threshold database while it was being copied to the joining IOP. IOP joining is terminated
and restarted.
Related Messages
IOP n .MtcMon status: The join process has failed for IOP x .
Hardware/Software This message is generated in response to a hardware or software error that occurred during IOP
joining.
Action No action is required. IOP joining is restarted automatically.