HP NetServer AA 4000, Manual

Page: 301 / 386

291
Chapter 13 MtcMon Messages
IOPn.MtcMon status: The synchronizing CE’s memory size is not equal to the active CE’s memory size.
CE1 memory size = y kilobytes.
CE2 memory size = z kilobytes.
Variables y – the size (in kilobytes) of memory in CE1
z – the size (in kilobytes) of memory in CE2
Severity Error
Description The physical memory sizes of the two CEs are different. CE synchronization cannot be
performed until this condition is resolved.
Hardware/Software This message is generated as a result of a CE hardware configuration error.
Action • Shut down one or both CEs.
• Adjust the amount of memory for one or both CEs.
• When the two CEs have the same amount of memory, power them up and allow them to
synchronize.
IOPn.MtcMon status: The Windows NT operating system on the active CE(s) has been shut down by bugcheck.
Severity Error
Description This message indicates that the Windows NT operating system running on the CE was shut
down due to a stop error with screen dump.
Related Messages
IOP n .MtcMon status: A crash dump is being taken for the Windows NT
operating system running on the CEs.
IOP n .MtcMon status: CE x has been removed from service.
Hardware/Software The Windows NT was shut down using the stop error mechanism. The reason for the failure
may be hardware or software related.
Action • If crash dumps are enabled on the CE, examine the crash dump to determine the cause of
the stop error.
• The CE operating system automatically reboots unless it has experienced enough stop
errors to exceed the Marathon threshold. In this case, preserve the screen dump
information, and contact your service provider for assistance.