Configuration
78
Figure 3-58
Alarm-In Actions 2 Screen
11. In the
Actions 2
tab, highlight the desired box under the
PTZ
heading, and press
. A list of PTZ presets appears. Select the preset position for each PTZ camera,
where you want PTZ cameras to move to whenever the DVR detects an input on
the associated alarm input.
12. Highlight the desired box under the
Spot Monitor
heading, and press
. A list
of SPOT monitors and cameras appears. Each SPOT monitor can be associated
with a camera. The DVR will display the associated camera on the SPOT monitor
whenever it detects an input on the associated alarm input.
13. You can save your Alarm-In changes by highlighting
Save
and pressing
.
Selecting
Cancel
exits the screen without saving the changes.
Motion Detection Screen
1.
Highlight
Motion Detection
in the Event menu and press
. The Motion
Detection setup screen (
) appears.
Figure 3-59
Motion Detection Settings Screen
2.
Your DVR has built-in video motion detection. Video motion detection can be
turned On or Off for each camera by highlighting the motion detection number
and pressing
.
Summary of Contents for HRXD16
