Honeywell HRXD16 User Manual Download Page 121

Page: 121 / 156

USB Hard Disk Drive Preparation

Document 900.0856

Rev 3.00

121

11/07

USB Hard Disk Drive Preparation

Preparing the USB-IDE Hard Disk Drive in Windows
2000

Note

Preparing a USB-IDE hard disk drive under Windows XP is
almost identical to Windows 2000.

Connect the USB-IDE hard disk drive to your computer using the USB Cable.

Turn on your computer.

The USB device icon should display on the Taskbar.

If the USB-IDE hard disk drive is partitioned or has data, it will show up in

Computer

as a hard disk drive icon. Check the file system by right-clicking on the

icon and checking under

Properties > General > File System

. If the file system

is NOT FAT32 format, format the USB-IDE hard disk drive using the FAT32 format.

If the USB-IDE hard disk drive is not partitioned, go to

Administrative Tools

in the

Control Panel

and launch

Computer Management

. Open

Disk Management

Storage

and right-click an unallocated region of the USB-IDE hard disk drive.

Then, click

Create Partition

In the

Create Partition wizard

, click

Next

then

Primary Partition

, and follow the

instructions on the screen. Make sure that the FAT32 is selected for the file
system.

Note

The partition size should be less than 32GB because of Microsoft
limitations.

Summary of Contents for HRXD16





























































































































































Search results

Summary of Contents for HRXD16

Reviews:

Related manuals for HRXD16

Brands by name

Popular brands

Honeywell HRXD16, User Manual

Search results

Summary of Contents for HRXD16

Reviews:

Related manuals for HRXD16

Brands by name

Popular brands