Honeywell HRXD16, User Manual

Page: 104 / 156

Operation
104
Figure 4-9 Mouse Display Menu
• Clicking Camera and selecting the camera number is the same as pressing the
individual camera buttons on the front panel which displays the selected camera
full screen. When in the PIP display mode, clicking the right mouse button and
selecting
PIP changes the location and the size of the PIP.
• Selecting PIP, 2x2, 3x3 and 4x4 displays the cameras in the selected multi-view
screen mode.
• Clicking Previous Group or Next Group is the same as pressing the Left or Right
buttons on the front panel which moves to the previous or next page.
• Selecting Edit Group supports the active cameo function. Select Edit Group and
choose a camera that you want to change the display position (for example,
Camera A). Then, click the right mouse button to display the menu. If you select
another camera in the menu (for example, Camera B), the screen displays
Camera B instead of Camera A. When in the 4x4 format, Camera A and Camera B
will switch positions.
Recording Video
Once you have installed the DVR following the instructions in Chapter 2, Installation , it
is ready to record. The DVR will start recording based on the settings you made in the
Record setup screen (see Chapter 3, Configuration ).
Recording can be set to Recycle On or Recycle Off . The factory default is Recycle On ,
which means the DVR records over the oldest video once the hard disk is full. Setting
the DVR to
Recycle Off causes it to stop recording once the hard disk is full.
Resolution can be set to Standard or High . The factory default resolution is Standard .
When set to Standard , the DVR has a maximum recording speed of 240 ips. When set
to High , the DVR has a maximum recording speed of 120 ips.
Note When the DVR is in the search mode, the maximum recording
speed decreases by half. For example, in search mode, the
DVR’s maximum recording speed decreases to 120 ips when set
to Standard resolution.